Switching the ECU i noticed the fuel said empty after dumping 7 gallons in it said 3/4 full and started right up. Had a rough idle and alot of valve sounds, but as it warmed up most of it went away. There is still a slightly rough idle and now the code says cylinders 1 and 7 have misfires (actually ...

Ive messaged spanker about getting a new one but alot of it is from me using a heavy dosage of non conductive cleaner. there was some water that got into it (my fault) snowing while working on it. im sure there is more issues ill be finding. we had a huge heat wave kick in to start spring finally so ...

Well while taking out the ecu i found something interesting. one of the pins is completely corroded off. I know the pictures aren't the best but you can see the missing pin and the green port (the corroded pin broke off into it) Would you guys know what pin that broke off here went to? And I am ...

from what i can tell its pretty clean. some connectors here and there are pretty brittle and frail but still have good connections. i cant tell under the car though. maybe it took damage where i couldnt see. and alrighty. do you know good places to buy a new ecu for my 1997 winter edition one? or ...

as listed before i have replaced that relay as well and cleaned that terminal. it makes me wonder if ive got an issue with the ecm or ive got a few wires all pinched somewhere. when i bridge the motronic relay i get fires just only feels like one cylinder is trying though. normal relay no cylinders ...

alrighty thank you for the tip! I dont know much about vcds lite so any tips and tricks are always welcome. after clearing and redoing it it clears. but when you try to start it again all of these will show back up.

17817 - EVAP Purge Valve (N80): Electrical Malfunction
P1409 - 35-10 ...

i was using vagcom and didn't see a way to reset. it just kinda does a quick scan then and there i believe. but im not 100%. But that's why I'm wondering if its an issue with the ECM causing these faults.

yes I have went through all the connections I can see and don't see any issues currently ...

Alrighty ive finally got the computer and paid for the program so i could run a full diag. this is all the issues it seems to see. does this help at all with a better location for a possible fault in my wiring? or maybe something more specific not working right? all connection seem to be fine. could ...

@ronin ahh i think i found the location your talking about it is on the passenger side for me (see attached pictures) the yellow connector you had bridged doesnt exist in the same spot and found it but i have a purple relay with no number on it. i still tried it bridged with no change. there were ...

i cant find it and all i have now is some broken mounts for the interior plastics haha.like i genuinely dont see any relay locations and i was able to get the underside flap off where your shins would be at and still dont see any relays above. I have a Left hand drive model as im in the US, if its ...