#1 Swede :D

Where are you from, what D2 do you drive? Make yourself known here.
Post Reply
Manick
Posts: 3
Joined: Wed Sep 27, 2023 8:51 pm

#1 Swede :D

Post by Manick »

I might as well start here since i just registerd :)

Name is Tommy, 38 years of age live in Sweden.

I got two -97 D2 S8's at the moment, one of them is more or less a daily driver 32V with manual transmission from factory.
The other one is more or less exactly the same other then the twin turbo V8 with twin BorgWarner EFR 6758, RS6 C7 brakes and so on :D

I'v done lots of 01E gearbox rebuilds during the years, i'v also done some AHC/AKH/BCY engine rebuilds, so if i can help around theese topics, i sure will.
25095-ef460f6f6e4ddb7302f1a6692025fa03.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Ronin
Site Admin
Posts: 101
Joined: Wed Sep 06, 2023 4:57 pm

Re: #1 Swede :D

Post by Ronin »

Wow man that's some proper effort.

Are your subframe bushes solid aluminium?!
MikkiJayne
Posts: 33
Joined: Wed Sep 06, 2023 6:26 pm

Re: #1 Swede :D

Post by MikkiJayne »

Thats very cool indeed 8-) How do you find heat management with the turbos? Any more pics?
Manick
Posts: 3
Joined: Wed Sep 27, 2023 8:51 pm

Re: #1 Swede :D

Post by Manick »

Ronin wrote: Wed Sep 27, 2023 9:48 pm Wow man that's some proper effort.

Are your subframe bushes solid aluminium?!
Solid but cut in half ofcourse to be able to install them.
Manick
Posts: 3
Joined: Wed Sep 27, 2023 8:51 pm

Re: #1 Swede :D

Post by Manick »

MikkiJayne wrote: Wed Sep 27, 2023 10:09 pm Thats very cool indeed 8-) How do you find heat management with the turbos? Any more pics?
Its actually not started up just yet, we are finishing of the cold side of the turbo setup then its just wires and hoses left to fire her up.
Manifolds will be coated and wrapped to isolate the heat, shouldnt be an issue.

And yes, i got tons more pics of this build, just didnt think it would fit a "hello-topic" :)
User avatar
Ronin
Site Admin
Posts: 101
Joined: Wed Sep 06, 2023 4:57 pm

Re: #1 Swede :D

Post by Ronin »

Manick wrote: Wed Sep 27, 2023 11:44 pm
MikkiJayne wrote: Wed Sep 27, 2023 10:09 pm Thats very cool indeed 8-) How do you find heat management with the turbos? Any more pics?
Its actually not started up just yet, we are finishing of the cold side of the turbo setup then its just wires and hoses left to fire her up.
Manifolds will be coated and wrapped to isolate the heat, shouldnt be an issue.

And yes, i got tons more pics of this build, just didnt think it would fit a "hello-topic" :)
Your wish is my command!
viewforum.php?f=24
Post Reply