Fuel pump refurb part numbers

[Ronin]

Here are the parts required to fully refurb a D2 fuel pump for the 2.8, 3.7 and 4.2 models

To refurb one pump assembly you will need:

2x 8x11.5 crush washers for banjo fitting
1x 2.5mm Section 69mm Bore NITRILE o-ring.
1x 2mm Section 110mm Bore NITRILE o-ring.
1x 1.5mm Section 9mm Bore NITRILE o-ring.
1x 1.5mm Section 20mm Bore NITRILE o-ring.
1x 405-052-002-001Z - Genuine VDO/Continental fuel pump
1x 441201511C fuel filter
2x 12x1.5(id x thickness) crush washers for fuel filter banjo fitting, audi part number n0138128
2x 14x1.5 (id x thickness) crush washers for fuel filter banjo fitting, audi part number n0138149

[Ronin]

fuel.jpg

[Rightthen]

If anybody is doing a housing rebuild, let me know. I had to over order my o-rings, so I've got spares that you're welcome to. Just ping your address and I'll post them. Slight difference in the fact my big ones are 2x112, but they fit fine.

[Strummagnet]

Is it worth investing in this?

https://v12throttle.com/products/audi-a ... u-INdd8kgQ

[Ronin]

Not if you live in UK. American fuel 'yellow's' that top part of the fuel pump housing and makes it very brittle/crack so they started to make their own. UK cars are not affected by this...

BUT, seeing as fuel pumps and other things are being discontinued or NLA.. I wouldn't mind having one on the shelf if you have some money to burn as its quite a critical part of the car.